4 save dtm infomation, 5 exit fieldmate and dtm works, Save dtm infomation -31 – Yokogawa EJX930A User Manual
Page 60: Exit fieldmate and dtm works -31
<4. Preparation>
4-31
IM 01C25R51-01E
4.6.4 Save DTM Infomation
If “Save to file” is performed, a device parameter snapshot is saved to an external file-.dns, which
includes the following parameters.
• User Flow Parameters
• Device Flow Parameters
• Device General Parameters
For detail of .dns, refer to section 3.4.1, 6.1.2 and 9.1.
1. Click the [File] → [Save to file] at DTM Works window.
2. The message below appears when [Save to file] is clicked without [Upload from Device].
Click the [OK] button.
Figure 4.34 Confirmation Message in Saving .dns file
3. Save .dns file in the computer.
NOTE
.dns file is not compatible among different communication.
4.6.5 Exit FieldMate and DTM Works
DTM Works and FieldMate are ended by closing each window.
1. Click the [File] → [Exit] at DTM Works window.
2. Click the [File] → [Exit] at FieldMate window.0