Yokogawa EJX930A - Manual (Page 143)

<10. Error Message> 10-1
IM 01C25R51-01E
10. Error Message
Error message is shown in both pop up message and error log file
(EJXMVTool.log/DYFMVTool.log).
Figure 10.1 Error message example
In case of Physical Property error, code and sub code is shown in error log file
(EJXMVTool.log/DYFMVTool.log).
10.1 Error Message
Table 10.1 Error message
Code Sub code Information Message Explanation Recovery
600 8
[Display]
The range that specified in the step of
Fluid Operating Range Setup is too
narrow. Expand the range of Pressure
or Temperature.
[Log file]
Physical Calc lib Error - ERR_RANK
Rank deficient
The temperature or pressure
range which was set by the
user at the Fluid Operating
Range Setup is too narrow. Try
another range value.