Yokogawa EJX930A - Manual (Page 98)

<7. Operation of EJXMVTool> 7-5
IM 01C25R51-01E
Step 1
Select the type of fluid;
• Gas or Steam (Default) (Go to Step 2 )
• Liquid (Go to Step 3)
Step 2
When “Gas or Steam” is selected for [Type], select the Category from the following;
• Natural Gas (Default)
• Steam
• Gas (DIPPR)
• Gas (Custom Data Table)
When “Natural Gas (Default)” is selected for [Category], select the Fluid name/Method from
the followings;
• AGA8 Detail Characterization Method (Default)
• AGA8 Gross Characterization Method 1
• AGA8 Gross Characterization Method 2
• ISO12213 molar-composition analysis
• ISO12213 physical properties
When “Steam” is selected for [Category], select the Fluid name/Method from the followings;
• Superheated and Saturated steam
• Saturated steam
When “Gas (DIPPR)” is selected for [Category], select the Fluid name/Method from the
followings;