Yokogawa EJX930A - Manual (Page 34)

<4. Preparation> 4-5
IM 01C25R51-01E
Following gives FlowNavigator Software Component assigned to FlowNavigator setup window
button.
Table 4.1 Assignment of FlowNavigator setup window button
FlowNavigator
Software Component
FlowNavigator setup window button
Recommended Custom
[FlowNavigator] [FlowNavigator HART]
[FlowNavigator
F OUNDATION fieldbus]
F OUNDATION fieldbus Program *1
(EJXMVTool F OUNDATION fieldbus
and DYFMVTool F OUNDATION
fieldbus)
Installed Not installed Installed
HART Program *2
(EJXMVTool HART)
Installed Installed Not installed
Resource *3
(Database and Instruction manual)
Installed Installed Installed
*1: Installed by “FlowNavigator F OUNDATION fieldbus program” Upgrade Setup. For detail,
refer to “Installation Procedure <Step 3>”.
*2: Installed by “FlowNavigator HART program” Upgrade Setup. For detail, refer to “Installation Procedure <Step 4>”.
*3: Installed by “FlowNavigator Resource” Setup. For detail, refer to “Installation Procedure <Step 5>”.
Installation Procedure
Following gives the FlowNavigator recommended installation procedures.
IMPORTANT
The quality, operability of FlowNavigator is certified for use with FieldMate only.
Step 1 Login Windows
Login Windows as an Administrator or a user with an administrative authority.
Step 2 Insert the “FlowNavigator CD-ROM”
Insert the “FlowNavigator CD-ROM” into the CD-ROM drive. Auto run starts and a FlowNavigator
setup window appears. And click [FlowNavigator].
Figure 4.2 FlowNavigator Setup window