Yokogawa EJX930A - Manual (Page 58)

<4. Preparation> 4-29
IM 01C25R51-01E
4.6.3 Start Device DTM
(1) Start DTM Works
(a) Case 1 (Except for EJX910A/EJX930A HART 7 model)
Select the icon of the target device. Regarding the device DTM on which FlowNavigator works,
refer to Table 4.2, Table 4.3 and Table 4.4.
Click the [Action] → [Assigned DTM]
Figure 4.32a Start DTM Works
(b) Case 2 (For EJX910A/EJX930A HART 7 model)
Select the icon of the target device.
Click the [Action] → [Select DTM]
Select “EJX910 V2.1” DTM and click OK.
Fig 4.32b Select “EJX910 V2.1” DTM