Yokogawa EJX930A - Manual (Page 161)

. . <
Appendix D. F OUNDATION fieldbus Communication Device Information>
D-2
IM 01C25R51-01E
(2) Select the port
On the screen shown up, select “Port0" and press “Edit”.
Figure D2.2 NI-FBUS Interface Config Screen
(3) Setting
After that, on the screen shown up, select the items indicated as below.
Figure D2.3 NI-FBUS H1 Port Properties
Device Address: Select [Visitor]
Device Type: Select [Link Master Device]
Usage: Select [NI-FBUS]
CAUTION
When connect the NI-FBUS card to the Fieldbus segment when other Link Master may exist, be
sure to set the above beforehand.
If not, setting may cause disturbance of control.