Yokogawa EJX930A - Manual (Page 14)

<2. General> 2-3
IM 01C25R51-01E
2.2 To Start with
1) FlowNavigator is the software utilizing FDT/DTM technology. To use this software, a frame
application is required. ‘Field Mate’ is bundled with this software package as Yokogawa
standard frame application. The quality and operability of FlowNavigator is certified for use
with FieldMate only. Please use ‘Field Mate’ as frame application.
Also, you can use Field communication server included in FieldMate as a Communication
DTM. For the installation and operation of FieldMate, please refer to the printed document.
• “FieldMate Getting Started” (IM 01R01A04-01E) <Document No.1>
• “FieldMate Operational Precaution” (IM 01R01A01-91E) <Document No.2>
For the details of installation and operation, please also refer to the user’s manual of
FieldMate in pdf format shown by start menu.
2) Before starting any operation, please carefully read the instructions in the user’s manual
of FlowNavigator and obtain necessary knowledge about installation and operation of the
software.
The User’s manual “FSA120 Flow Configuration Software” (IM 01C25R51-01E) is provided
as a Portable Document Format (pdf) file in the CD-ROM labeled “FlowNavigator”, and is
located at
<FlowNavigator CD-ROM>: \EJXMVTool_Manual.pdf
<FlowNavigator CD-ROM>: \DYFMVTool_Manual.pdf
Set the FlowNavigator CD-ROM in the CD-ROM drive of your computer and double click the
name of the file.
To read the file in PDF format, Adobe Reader is required.
If Adobe Reader is not on your PC, download and install Adobe Reader from the following
website.
<http://www.adobe.com/>