Yokogawa EJX930A - Manual (Page 120)

<8. Operation of DYFMVTool> 8-4
IM 01C25R51-01E
(1) In case of Gas temperature pressure compensation
Step 1
Select the Category from the followings;
• Natural Gas
• Gas (DIPPR)
• Gas (custom data table)
Step 2-1
When “Natural Gas” is selected from “Category”, select “Name/Method” from the followings;
• AGA8 Detail Characterization Method
• AGA8 Gross Characterization Method 1
• AGA8 Gross Characterization Method 2
• ISO12213 molar-composition analysis
• ISO12213 physical properties
Step 2-2
When “Gas (DIPPR)” is selected from “Category”, select “Name/Method” DYFMVTool supports
the materials shown in Table 8.2.
Step 2-3
When “Gas (custom data table)” is selected from “Category”, set the custom Fluid Name/Method
in the blank box.
(2) In case of Liquid temperature compensation
Step 1
Select the “Category” from the followings;
• Liquid (DIPPR)
• Liquid (custom data table)
Step 2-1
When “Liquid (DIPPR)” is selected from “Category”, select “Name/Method”. DYFMVTool
supports the materials shown in Table 8.2.
Step 2-2
When “Liquid(custom data table)” is selected from “Category”, set the custom Fluid Name/
Method in the blank box.