Document Outline

• Safety Precautions
• Conventions Used in This Manual
• Contents
• Chapter 1 Explanation of Functions
  • 1.1 Overview of the MX100
    • Main Module (MX100-E)
    • Input/Output Modules
    • Base Plate (MX150)
    • PC Software
  • 1.2 Main Module Functions
    • Communications
    • Measurement
    • Filters
    • Computation
    • Remote RJC (RRJC)
    • Alarms
    • Contents Displayed on the 7-Segment LED
    • Saving Data to the CF Card
  • 1.3 Functions of the 4-CH, High-Speed Universal Input Module
    • Input Type and Measurement Range
    • Measurement Interval, Integration Time, and Filter
    • Measurement Synchronization
    • Common Mode Voltage
  • 1.4 Functions of the 10-CH, Medium-Speed Universal Input Module
    • Input Type and Measurement Range
    • Measurement Interval, Integration Time, and Filter
    • Measurement Synchronization
    • Common Mode Voltage
  • 1.5 Functions of the 30-CH, Medium-Speed DCV/TC/DI Input Module
    • Input Type and Measurement Range
    • Measurement Interval, Integration Time, and Filter
    • Measurement Synchronization
    • Common Mode Voltage
  • 1.6 Functions of the 6-CH, Medium-Speed Four-Wire RTD Resistance Input Module
    • Input Type and Measurement Range
    • Measurement Interval, Integration Time, and Filter
    • Measurement Synchronization
    • Common Mode Voltage
  • 1.7 Functions of the 4-CH, Medium-Speed Strain Input Module (-B12, -B35, and -NDI)
    • Measurement Range
    • Measurement Interval, Integration Time, and Filter
    • Measurement Synchronization
    • Common Mode Voltage
    • Initial Balancing (Initial Unbalance Value Adjustment)
    • Scaling Settings When Using a Strain Gauge Type Sensor
    • Compensation When the Gauge Factor Differs
  • 1.8 Functions of the 10-CH, High-Speed Digital Input Module (-D05, -D24)
    • Measurement Interval
    • Filters
  • 1.9 Functions of the 8-CH, Medium-Speed Analog Output Module
    • Output Type
    • Output Range
    • Output Update Interval
    • Operation When Errors Occur upon Startup
    • Output Operation During Calibration
  • 1.10 Functions of the 8-CH, Medium-Speed PWM Output Module
    • Output Type
    • Output Waveform
    • Pulse Interval
    • Output Update Interval
    • Output Range
    • Operation When Errors Occur upon Startup
  • 1.11 Operation of the 8-CH Medium-Speed Analog Output Module and the 8-CH Medium Speed PWM Output Module
    • Output Selection When Errors Occur upon Startup
    • Output Status
    • Output on Disabled Channels
    • Output Operation per Settings and Setting Changes
    • Steady Output Operation
    • Output When Abnormal, or after Recovery from Abnormality
  • 1.12 Functions of the 10-CH, Medium-Speed Digital Output Module
    • Output Type
    • Output Update Interval
    • Relay Action and Hold Behavior
• Chapter 2 Installation and Wiring
  • 2.1 Handling Precautions
  • 2.2 Installation
    • Installation Location
    • Installation Procedure
  • 2.3 Attaching the Modules
    • Attachment Procedure
    • Attachment Positions and Channel Numbers
  • 2.4 Connecting the Signal Wires
    • Terminal Arrangement Markings on the Terminal Cover
    • Attaching and Removing the Terminal Block
    • Attaching Plates with Screw Terminals and Plates with Clamped Terminals for Current
    • Screw Terminal Block
    • General Precautions When Wiring the Input/Output Signal Wires
    • Wiring Procedure
    • Wiring the Universal Input Module and DCV/TC/DI Input Module
    • Wiring the Four-Wire RTD Resistance Input Modules
    • Wiring the Strain Input Modules
    • Wiring the Digital Input Modules (-D05, -D24)
    • Wiring the Analog Output Modules
    • Wiring the PWM Output Modules
    • Wiring the Digital Output Modules
  • 2.5 Power Connection and ON/OFF
    • Connections with the Power Cord (Power Supply/Cord Basic Specification Code 1*)
    • Wiring the Power Supply Terminal (Power Supply/Cord Basic Specification Code 1W)
    • Turning ON/OFF the Power Switch
  • 2.6 Connecting the Ethernet Cable
    • Connection Procedure
    • Checking the Communication Status
    • Initializing the Settings
  • 2.7 Measures against Noise on the MX100
    • Integrating A/D Converter
    • First-Order Lag Filter
  • 2.8 Handling of the CF Card
    • Handling Precautions of the CF Card
    • Inserting the CF Card
    • Ejecting the CF Card
• Chapter 3 Troubleshooting and Maintenance
  • 3.1 Error Display on the 7-Segment LED and Corrective Actions
    • Errors at Power ON
    • System Errors
    • Module Errors
    • Media-Related Errors
    • Communication Errors
  • 3.2 Troubleshooting
  • 3.3 Calibration
    • Range Calibration of DC Voltage, RTD, Resistance, Strain, and Analog Output
    • Calibration of Temperature Measurements using Thermocouples
  • 3.4 Maintenance of Parts
  • 3.5 MX100 Maintenance and Test Using Communication Commands
    • Connecting the Main Module and the PC
    • Setting the Terminal Emulator
    • List of Maintenance/Test Commands
    • Specifications of the Maintenance/Test Port
• Chapter 4 Specification
  • 4.1 Common Specifications
  • 4.2 Main Module (MX100-E) Specifications
  • 4.3 Base Plate (MX150) Specifications
  • 4.4 4-CH, High-Speed Universal Input Module (MX110-UNV-H04) Specifications
  • 4.5 10-CH, Medium-Speed Universal Input Module (MX110-UNV-M10) Specifications
  • 4.6 30-CH, Medium-Speed DCV/TC/DI Input Module (MX110-VTD-L30) Specifications
  • 4.7 6-CH, Medium-Speed Four-Wire RTD Resistance Input Module (MX110-V4R-M06) Specifications
  • 4.8 4-CH, Medium-Speed Strain Input Module (MX112) Specifications
  • 4.9 10-CH, High-Speed Digital Input Module (MX115) Specifications
  • 4.10 8-CH, Medium-Speed Analog Output Module (MX120-VAO-M08) Specifications
  • 4.11 8-CH, Medium-Speed PWM Output Module (MX120-PWM-M08) Specificaions
  • 4.12 Specifications Common to the 8-CH Medium-Speed Analog Output Module and the 8-CH Medium Speed PWM Output Module (MX120)
  • 4.13 10-CH, Medium-Speed Digital Output Module (MX125) Specifications
• Chapter 5 Dual Save Functions (/DS Option)
  • 5.1 Overview of Functions
  • 5.2 Explanation of Functions
  • 5.3 CF Card Data File
• Index