Avaya P333T - Manual (Page 112)

Chapter 6 CLI – Layer 2
96 Avaya P333T User’s Guide
set snmp timeout
Use the set snmp timeout command to set the SNMP timeout in seconds. This
command is useful for access using the Device Manager.
The syntax for this command is:
set snmp timeout <number>
set system location
Use the set system location command to set the mib2 system location MIB
variable.
The syntax for this command is:
set system location [<string>]
set system name
Use the set system name command to set mib2 system name MIB variable.
The syntax for this command is:
set system name [<string>]
set system contact
Use the set system contact command to set mib2 system contact MIB
variable.
The syntax for this command is:
set system contact [<string>]
string Location name. The location name is cleared if this field is left
blank. A string of 2 words or more must be type in quotation
marks – e.g. “Operations Floor”.
string System name. The system name is cleared if this field is left blank. A
string of 2 words or more must be type in quotation marks –
e.g. “Backbone Stack”.
string Contact person. The contact person field is cleared if this field is
blank. A string of 2 words or more must be type in quotation
marks – e.g. “Yigdal Naouri”.