Avaya P333T - Manual (Page 151)

Chapter 6 CLI – Layer 2
Avaya P333T User’s Guide 135
Supervisor Level Commands
This level includes all the commands of the User and Privileged Levels (including
all
show and set commands).
username
Use the username command to add a local user account. You can only do this
from within the Supervisor Level.
The syntax for this command is:
username <name> password <passwd> access-type{read-only|read-
write|admin}
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
no username
Use the no username command to remove a local user account.
The syntax for this command is:
no username <name>
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
name New user name
passwd User’s password
access-type Access type definition - read only, read-write or
administrator