Avaya P333T - Manual (Page 62)

Chapter 6 CLI – Layer 2
46 Avaya P333T User’s Guide
show ip route
Use the show ip route command to display IP routing table entries.
The syntax for this command is:
show ip route
Output Example:
P330-N> show ip route
show image version
Use the show image version command to display the software version of the
image on both memory banks of a specified switch.
The syntax for this command is:
show image version [<mod_num>]
If no switch number is specified, the image version of the all switches will be
displayed.
Output Example:
P330-N> show image version 1
Mod Module-Type Bank Version
------ ----------- ---- --------
1 24x10/100Base-T with optional expansion slot A 3.3.14
1 24x10/100Base-T with optional expansion slot B 3.5.19
Destination Gateway
----------- -----------
149.49.1.1 172.20.22.201
190.20.0.0 172.20.22.202
172.20.0.0 172.20.22.96