Avaya P333T - Manual (Page 67)

Chapter 6 CLI – Layer 2
Avaya P333T User’s Guide 51
show port trap
Use the show port trap command to display information on SNMP generic
link up/down traps sent for a specific port.
The syntax for this command is:
show port trap [<mod_num>[/<port_num>]]
Output Example:
P330-N> show port trap 1/1
Port 1/1 up/down trap is disabled
show port channel
Use the show port channel command to display Link Aggregation Group
(LAG) information for a specific switch or port.
The syntax for this command is:
show port channel [<mod_num>[/<port_num>]]
Output Example:
show port channel 1
Port Channel Status Channel Name
------ --------------- --------------------------------
1/1 off
1/2 off
1/3 on server1
1/4 on server1
------ --------------- --------------------------------
1/5 off
etc...
Type Port type, for example:
For the P332-ML and P332GT-ML switches - 100BaseT,
1000BaseT, 1000BaseS.
For the P333T/P334T/P332MF/P333R/P333R-LB switches -
10BaseT, 10BaseFL, 100BaseTX, 100BaseFX MM, 100BaseFX
SM, 10/100BaseTX.