Agency approval, Mtbf, X330gt2 gigabit ethernet expansion module – Avaya P333T User Manual
Page 168: Installing the expansion module in the avaya p330, Agency approval mtbf
Appendix A
Specifications
152
Avaya P333T User’s Guide
Agency Approval
The transceivers comply with:
•
EMC Emission: US – FCC Part 15, Subpart B, Class A;
Europe – EN55022 class A
•
Immunity: EN50082-1
•
Safety: UL for US UL 1950 Std., C-UL (UL for Canada) C22.2 No.950 Std., Food
and Drug Administration (FDA) 21 CFR 1040.10 and 1040.11, and CE for
Europe EN60950 Std. Complies with EN 60825-1.
MTBF
The Mean Time Between Failures (MTBF) for the X330G2 Expansion Sub-module is
594,639 hours.
X330GT2 Gigabit Ethernet Expansion Module
The X330GT2 Expansion Module provides two copper Gigabit Ethernet 1000Base-T
ports.
Note:
The X330GT2 module is only supported by Avaya P330 embedded software
versions 2.4 and higher.
Installing the Expansion Module in the Avaya P330
1
Remove the blanking plate or other Module (if installed).
2
Insert the Module gently into the slot, ensuring that the Printed Circuit Board
(PCB) is aligned with the guide rails.
The PCB not the metal base plate fits into the guide rail.
3
Press the Module in firmly until it is completely inserted into the Avaya P330.
4
Gently tighten the two screws on the front panel of the expansion module by
turning the screws.
Note:
The expansion modules contain components sensitive to electrostatic
discharge. Do not touch the circuit board unless instructed to do so.