Avaya P333T - Manual (Page 79)

Chapter 6 CLI – Layer 2
Avaya P333T User’s Guide 63
show port auto-negotiation-flowcontrol-advertisement
Use the s how port auto-negotiation-flowcontrol-advertisement
command to display the flowcontrol advertisement for a Gigabit port used to
perform auto-negotiation.
The syntax for this command is:
show port auto-negotiation-flowcontrol-advertisement
[<mod_num>[/<port_num>]]
Output Example:
P330-N> show port auto-negotiation-flowcontrol-advertisement
Port 1/1 advertises no flow control capabilities.
Port 1/2 advertises no flow control capabilities.
Port 1/3 advertises no flow control capabilities.
etc.
show trunk
Use the show trunk command to display VLAN tagging information of the
ports, port binding mode, and the port VLAN ID.
The syntax for this command is:
show trunk [<mod_num>[/<port_num>]]
Output Example:
P330-N> show trunk
Port Mode Binding mode Native vlan
------ ----- ----------------------------- -----------
1/1 dot1q bound to configured vlans 1
1/2 dot1q bound to all vlans 1
1/3 off statically bound 1
1/4 off statically bound 1
1/5 off statically bound 1
mod_num Number of the switch
port num Number of the port