Avaya P333T - Manual (Page 149)

Chapter 6 CLI – Layer 2
Avaya P333T User’s Guide 133
set radius authentication secret
Use the set radius authentication secret command to enable secret
authentication for the P330 unit.
The syntax for this command is:
set radius authentication secret <string>
string text password
Example:
P330-N(super)# set radius authentication secret sodot
set radius authentication server
Use the set radius authentication server command to set a primary or
secondary RADIUS server IP address.
The syntax for this command is:
set radius authentication server <ip-address>
<primary|secondary>
Example:
P330-N(super)# set radius authentication server 192.168.38.12
primary
clear radius authentication server
Use the clear radius authentication server command to remove a
primary or secondary RADIUS authentication server.
The syntax for this command is:
clear radius authentication server[{primary|secondary}]
ip-addr IP address of the RADIUS authentication server
primary default - Primary authentication server
secondary Secondary authentication server