Avaya P333T - Manual (Page 135)

Chapter 6 CLI – Layer 2
Avaya P333T User’s Guide 119
Example:
P330-N> set intelligent-multicast client-port-pruning-time 20
Done!
set intelligent-multicast router port pruning time
Use the set intelligent-multicast router-port-pruning time
command to define aging time for router ports.
The syntax for this command is:
set intelligent-multicast router-port-pruning time <time>
Example:
P330-N> set intelligent-multicast router-port-pruning time 20
Done!
set intelligent-multicast group-filtering delay time
Use the set intelligent-multicast group-filtering-delay time
command to define group filtering time delays.
The syntax for this command is:
set intelligent-multicast group-filtering-delay time <time>
Example:
P330-N> set intelligent-multicast group-filtering-delay time
20
Done!
set secure mac
Use the set secure mac command to add a unicast MAC address into the CAM
table of a secured port. This command is accessed only through connection to a
particular switch, not directly from the master switch.
Note: This command is not supported by the P332G-ML and P332GT-ML switches.
time The time in seconds.
time The time in seconds.