Avaya P333T - Manual (Page 99)

Chapter 6 CLI – Layer 2
Avaya P333T User’s Guide 83
no rmon event
Use the no rmon event command to delete an existing RMON event entry.
The syntax for this command is:
no rmon event <Event Index>
hostname
Use the hostname command to change the Command Line Interface (CLI)
prompt. The current switch number always appears at the end of the prompt.
The syntax for this command is:
hostname [<hostname_string>]
Note: If this command is to be implemented on a switch other than the stack master,
a session should be opened to the relevant switch.
Clear Commands Summary Table
Following is a Table of the Privileged Level clear commands.
hostname_string none – displays current hostname
string – the string to be used as the hostname
(up to 20 characters).
• clear timezone Returns the timezone to its default, UTC. Page 84
• clear ip route Clears IP routing table entries. Page 84
• clear snmp trap Clears SNMP trap on the system. Page 84
• clear vlan Clears VLAN entries. Page 85
• clear dynamic vlans Clears dynamic VLAN entries. Page 85
• clear port static-vlan Clears a VLAN statically configured on a
port. Page 86
• clear cam Clears all the CAM entries. Page 86
• clear log Clears the Log entries of a switch. Page 86
• clear port mirror Cancels port mirroring. Page 86
• clear secure mac Clears a MAC address. Page 87