Avaya P333T - Manual (Page 167)

Appendix A Specifications
Avaya P333T User’s Guide 151
Avaya Approved GBIC Transceivers
Caution: All Avaya approved GBICs are 5V. Do not insert a 3.3V GBIC.
Avaya supplies the following two GBIC transceivers for the Avaya P330 X330G2
Expansion Modules. You can order these directly from your local Avaya
representative using the PEC or COM Codes:
In addition, Avaya has tested and approved a number of GBIC transceivers from
other manufacturers for use with the Avaya X330G2 Expansion Module.
An up-to-date list can be found in Avaya’s website at the following address:
http://www.avayanetwork.com/ .
Click on the “Supported Devices” icon.
Specifications
X330G2- LX GBIC Transceiver
A 9 mm or 10 mm single-mode fiber (SMF) cable may be connected to a
1000Base-LX GBIC port. The maximum length is 10 km (32,808 ft).
A 50 mm or 62.5 mm multimode (MMF) fiber cable may be connected to a 1000Base-
LX GBIC port. The maximum length is 550 m (1,804 ft.) for 50 mm and 62.5 mm
cable.
The LX transceiver has a Wavelength of 1300 nm, Transmission Rate of 1.25 Gbps
and Input Power of 5V.
X330G2- SX GBIC Transceiver
A 50 µm or 62.5 µm multimode (MMF) fiber cable may be connected to a 1000Base-
SX GBIC port. The maximum length is 500 m (1,640 ft.) for 50 µm cable and 220 m
(722 ft.) for 62.5 µm cable.
The SX transceiver has a Wavelength of 850 nm, Transmission Rate of 1.25 Gbps and
Input Power of 5V.
Type Description PEC Code COM Code
GBIC SX
Transceiver Multimode Fiber
1000BaseSx (550 m) 4705-122 108659228
GBIC LX
Transceiver Single-mode Fiber
1000BaseLx (10 km) 4705-121 108659210