HP Integrated Lights-Out 4 - Manual (Page 102)

5. Select Network
→NIC and TCP/IP, and then press Enter.
6. On the Network Configuration menu, press the spacebar to toggle the Network Interface
Adapter setting to Shared Network Port – LOM or Shared Network Port – FlexibleLOM, as
shown in
Figure 45 (page 102) .
NOTE: The Shared Network Port option is available only on supported servers.
Figure 45 iLO RBSU Network Configuration window
7. Press F10 to save the configuration.
8. Select File
→Exit, and then press Enter.
After iLO resets, the Shared Network Port feature is active. Any network traffic going to or originating
from iLO is directed through the Shared Network Port LOM or FlexibleLOM port 1.
Enabling the iLO Shared Network Port feature through the iLO 4 Configuration Utility
1. Connect the Shared Network Port LOM or FlexibleLOM port 1 to a LAN.
2. Optional: If you access the server remotely, start an iLO remote console session.
You can use the .NET IRC or Java IRC.
3. Restart or power on the server.
4. Press F9 in the HP ProLiant POST screen.
The System Configuration screen appears.
5. Use the up or down arrow keys and the Enter key to navigate to the System Configuration
→iLO
4 Configuration Utility
→Network Options screen.
6. Select Network Interface Adapter, and then press Enter.
The Network Interface Adapter options appear, as shown in Figure 46 (page 103) .
102 Configuring iLO