Authorizing a new key by using the cli, Figure 27, Authorizing a new key by using the – HP Integrated Lights-Out 4 User Manual
Page 66
Figure 27 Security–Secure Shell Key page
5.
Select the check box to the left of the user to which you want to add an SSH key.
6.
Click Authorize New Key.
7.
Copy and paste the public key into the Public Key Import Data box as shown in
.
Figure 28 Public Key Import Data box
The key must be a 2,048-bit DSA or RSA key.
8.
Click Import Public Key.
Authorizing a new key by using the CLI
1.
Generate a 2,048-bit DSA or RSA SSH key by using ssh-keygen, puttygen.exe, or
another SSH key utility.
2.
Create the key.pub file.
3.
Verify that Secure Shell (SSH) Access is enabled on the Access Settings page.
For more information, see
“Configuring iLO access settings” (page 55)
.
4.
Use Putty.exe to open an SSH session using port 22.
5.
Change to the cd /Map1/Config1 directory.
66
Configuring iLO