Configuring alertmail settings, Enabling alertmail – HP Integrated Lights-Out 4 User Manual
Page 117
Enter the FQDN or IP address of the host server. The protocol (https://) and port number
(:2381) are added automatically to the IP address or DNS name to allow access from iLO.
If the URL is set through another method (for example, HPQLOCFG), click the browser refresh
button to display the updated URL.
4.
Select the Level of Data Returned.
This setting controls the content of an anonymous discovery message received by iLO. The
information returned is used for HP SIM HTTP identification requests. The following options
are available:
•
Enabled (iLO+Server Association Data) (default)—Enables HP SIM to associate the
management processor with the host server, and provides sufficient data to enable
integration with HP SIM.
•
Disabled (No Response to Request)—Prevents iLO from responding to HP SIM requests.
5.
Optional: Click View XML Reply to view the response that is returned to HP SIM when it
requests iLO management processor identification using the provided address.
6.
Click Apply to save the changes.
For more information about the Insight Management Agents, navigate to the Information
→Insight
Agent page.
Configuring AlertMail settings
iLO AlertMail enables you to configure iLO to send alert conditions detected independently of the
host operating system to a specified email address. iLO mail alerts include major host system
events.
You must have the Configure iLO Settings privilege to change these settings.
This feature and many others are part of an iLO licensing package. For more information about
iLO licensing, see the following website:
.
Enabling AlertMail
1.
Navigate to the Administration
→Management→AlertMail page, as shown in
.
Figure 54 Management – AlertMail page
2.
Select the Enable iLO AlertMail check box.
Configuring iLO Management settings
117