HP Integrated Lights-Out 4 - Manual (Page 25)

9. Press Enter.
iLO resets, and the iLO session is automatically ended. You can reconnect in approximately
30 seconds.
10. Resume the normal boot process:
a. Start the iLO remote console.
The iLO 4 Configuration Utility is still open from the previous session.
b. Press ESC several times to navigate to the System Configuration page.
c. Press ESC to exit the System Utilities and resume the normal boot process.
Managing iLO users by using iLO RBSU
You can use iLO RBSU to perform the following user management tasks:
•
“Adding iLO user accounts by using iLO RBSU” (page 25)
•
“Editing user accounts” (page 26)
•
“Removing user accounts” (page 27)
Adding iLO user accounts by using iLO RBSU
To add local iLO user accounts:
1.
Optional: If you access the server remotely, start an iLO remote console session.
You can use the .NET IRC or Java IRC.
2. Restart or power on the server.
3. Press F8 in the HP ProLiant POST screen.
iLO RBSU starts.
4. Select User
→Add, and then press Enter.
The Add User screen appears, as shown in Figure 8 (page 25) .
Figure 8 iLO RBSU Add User window
Setting up iLO by using iLO RBSU or the iLO 4 Configuration Utility 25