HP Integrated Lights-Out 4 - Manual (Page 137)

To access the iLO 4 Configuration Utility menu:
1.
Optional: If you access the server remotely, start an iLO remote console session.
You can use the .NET IRC or Java IRC.
2. Restart or power on the server.
3. Press F9 in the HP ProLiant POST screen.
The System Utilities screen appears.
4. From the System Utilities screen, select System Configuration
→iLO 4 Configuration Utility.
The iLO 4 Configuration Utility screen appears, as shown in Figure 66 (page 137) .
Figure 66 iLO 4 Configuration Utility screen
5. Select an option, and then press Enter.
You can use the iLO 4 Configuration Utility to perform the following tasks:
•
“Configuring Network Options” (page 137)
•
“Configuring Advanced Network Options” (page 139)
•
“Managing iLO users by using the iLO 4 Configuration Utility” (page 28)
•
“Configuring access settings by using the iLO 4 Configuration Utility” (page 140)
•
“Viewing information about iLO by using the iLO 4 Configuration Utility” (page 142)
•
“Resetting iLO to the factory default settings by using the iLO 4 Configuration Utility”
(page 325)
•
“Resetting iLO by using the iLO 4 Configuration Utility” (page 323)
Configuring Network Options
You can use the iLO 4 Configuration Utility Network Options menu to configure basic iLO network
options.
To configure iLO network options:
Configuring iLO by using the ROM-based utilities 137