HP Integrated Lights-Out 4 - Manual (Page 55)

Figure 24 iLO Federation Capable setting
Configuring iLO access settings
You can modify iLO access settings, including service, IPMI/DCMI, and access options. The values
that you enter on the Access Settings page apply to all iLO users. You must have the Configure iLO
Settings privilege to modify access settings.
The default configuration is suitable for most operating environments. The values that you can
modify on the Access Settings page allow complete customization of the iLO external access methods
for specialized environments.
Configuring service settings
The Service section on the Access Settings page shows the Secure Shell (SSH) Access and SNMP
Access settings and the TCP/IP port values.
The TCP/IP ports used by iLO are configurable, which enables compliance with any site requirements
or security initiatives for port settings. These settings do not affect the host system.
Changing these settings usually requires configuration of the web browser used for standard and
SSL communication. When these settings are changed, iLO initiates a reset to activate the changes.
To configure Service settings:
Configuring iLO access settings 55