Ilo mobile application, Ilo scripting and command line – HP Integrated Lights-Out 4 User Manual
Page 16
NOTE:
On servers that use the system RBSU, the iLO option ROM lists the installed license and
the firmware version. This information is not listed in the option ROM on UEFI systems.
iLO Mobile application
The HP iLO Mobile application provides access to the Remote Console of your HP ProLiant server
from your mobile device. The mobile application interacts directly with the iLO processor on HP
ProLiant servers, providing total control of the server at all times as long as the server is plugged
in. For example, you can access the server when it is in a healthy state or when it is powered off
with a blank hard drive. As an IT administrator, you can troubleshoot problems and perform
software deployments from almost anywhere.
For more information about the iLO Mobile application, see
iLO scripting and command line
You can use the iLO scripting tools to configure multiple iLO systems, to incorporate a standard
configuration into the deployment process, and to control servers and subsystems.
The HP iLO Scripting and Command Line Guide describes the syntax and tools available to use
iLO 4 through a command line or scripted interface.
16
Introduction to iLO