HP Integrated Lights-Out 4 - Manual (Page 90)

The following features support the use of IPv6:
•
IPv6 Static Address Assignment
•
IPv6 SLAAC Address Assignment
•
IPv6 Static Route Assignment
•
Integrated Remote Console
•
OA Single Sign-On
•
Web Server
•
SSH Server
•
SNTP Client
•
DDNS Client
•
DHCPv6 Address Assignment
•
DHCPv6 DNS and NTP Configuration
•
RIBCL over an IPv6 connection
•
SNMP
•
HP SIM SSO
•
WinDBG Support
•
HPQLOCFG and HPLOMIG over an IPv6 connection
•
AlertMail
•
Remote Syslog
•
Scriptable Virtual Media
•
CLI/RIBCL key import over an IPv6 connection
•
iLO Federation Management
IPv6 support for the iLO scripting interfaces requires the following versions of the iLO utilities:
•
HPQLOCFG 1.0 or later
•
HP Lights-Out XML Scripting Sample bundle 4.2.0 or later
•
HPONCFG 4.2.0 or later
•
LOCFG.PL 4.20 or later
•
HPLOMIG 4.20 or later
The IPv4 Summary section displays the following information:
•
DHCPv4 Status—Indicates whether DHCP is enabled for IPv4.
•
Address—The IPv4 address currently in use. If the value is 0.0.0.0, the IPv4 address is not
configured.
•
Subnet Mask—The subnet mask of the IPv4 address currently in use. If the value is 0.0.0.0,
no address is configured.
•
Default Gateway—The default gateway address in use for the IPv4 protocol. If the value is
0.0.0.0
, the gateway is not configured.
90 Configuring iLO