HP Integrated Lights-Out 4 - Manual (Page 131)

The following message appears:
Are you sure you want to send a Data Collection?
3. Click OK.
The following messages appear:
Data Collection Transmission initiated.
Data Collection Transmission in progress.
When the transmission is complete, the Last Data Collection Transmission and the Last Data
Collection Transmission Status are updated. The date and time are based on the configured
iLO time zone.
Sending Active Health System reporting information
Depending on whether you use the Direct or Central Connect configuration, iLO or the Insight RS
Hosting Device sends information about the health, configuration, and runtime telemetry of the
server to HP. This information is used for troubleshooting issues and closed-loop quality analysis.
•
For Direct Connect configurations, this data is transmitted every 7 days. You cannot edit or
delete the data collection schedule.
•
For Central Connect configurations, this data is transmitted every 7 days. You can change
the day of the week for data collection transmission in the Insight RS Console. For information
about configuring the data collection schedule, see the HP Insight RS online help.
The Active Health System Reporting Information section displays the following information:
•
Last Active Health System Reporting Transmission—The date and time of the last data collection.
•
Last Active Health System Reporting Transmission Status—The status of the last data
transmission.
•
Active Health System Reporting Frequency (days) (Direct Connect only)—The frequency at
which Active Health System data is sent to HP (days).
•
Next Active Health System Reporting Scheduled (Direct Connect only)—The next date and
time when Active Health System data will be sent to HP.
Use the following procedure to send Active Health System information immediately:
1.
Navigate to the Remote Support
→Data Collections page, as shown in
Figure 61 (page 130) .
2. Click Send Active Health System Report.
You must have the Configure iLO Settings privilege to perform this task.
The following message appears:
Are you sure you want to send an Active Health System report?
3. Click OK.
The following messages appear:
Active Health System Transmission initiated
Active Health System Transmission in progress
The collected data includes Active Health System information from the last 7 days.
When the transmission is complete, the Last Active Health System Reporting Transmission and
the Last Active Health System Reporting Transmission Status are updated. The date and time
are based on the configured iLO time zone.
NOTE: You can also download Active Health System information manually and send it to HP.
For instructions, see “Using the HP Active Health System” (page 176) .
Configuring Remote Support 131