HP Integrated Lights-Out 4 - Manual (Page 243)

This feature and many others are part of an iLO licensing package. For more information about
iLO licensing, see the following website:
http://www.hp.com/go/ilo/licensing .
For information about HP Secure Encryption and ESKM, see the HP Secure Encryption Installation
and User Guide
Configuring key manager servers
To configure key manager servers in iLO:
1.
Navigate to the Administration
→Key Manager page, as shown in
Figure 128 (page 243) .
Figure 128 Enterprise Secure Key Manager page
2. Enter the following information:
•
Primary Key Server—The primary key server IP address or FQDN and port.
•
Secondary Key Server—The secondary key server IP address or FQDN and port.
3. Optional: For configurations with a primary and secondary key server, select the Require
Redundancy check box to check for server redundancy.
HP recommends enabling this option. When this option is disabled, iLO will not verify that
encryption keys are copied to both of the configured Key Servers.
4. Click Apply.
Adding key manager configuration details
1. Navigate to the Administration
→Key Manager page.
The listed iLO Account on ESKM account name is ilo-<iLO MAC address>. The account name
is read-only and is used when iLO communicates with the ESKM.
Using HP Enterprise Secure Key Manager with iLO 243