HP Integrated Lights-Out 4 - Manual (Page 32)

7. Select one of the following, and then press Enter.
•
No Change—Returns you to the main menu.
•
Delete—Deletes this user.
•
Edit—Edits the user.
8. Depending on your selection in step 7 , do one of the following:
•
If you selected No Change, no further action is needed.
•
If you selected Delete, the user name is marked to be deleted when you save the changes
on this page.
•
If you selected Edit, update the login name, password, or user permissions.
9. Update as many user accounts as needed, and then press F10 to save the changes.
10. Press Esc until the main menu is displayed.
11. Select Exit and Resume Boot in the main menu, and then press Enter.
12. When prompted to confirm the request, press Enter to exit the utility and resume the boot
process.
Setting up iLO by using the iLO web interface
You can set up iLO using the web interface if you can connect to iLO on the network by using a
web browser. You can also use this method to reconfigure an iLO management processor.
Access iLO from a remote network client by using a supported browser and providing the default
DNS name, user name, and password. For information about the DNS name and default account
credentials, see
“Logging in to iLO for the first time” (page 32) .
For information about the configuration procedures available in the iLO web interface, see
“Configuring iLO” (page 36) .
Logging in to iLO for the first time
The iLO firmware is configured with a default user name, password, and DNS name. Default user
information is located on the serial number/iLO information pull tab attached to the server that
contains the iLO management processor. Use these values to access iLO remotely from a network
client by using a web browser.
NOTE: The serial number/iLO information pull tab is double-sided. One side shows the server
serial number, and the other side shows the default iLO account information. The same information
is printed on a label attached to the chassis.
The default values follow:
•
User name—Administrator
•
Password—A random eight-character alphanumeric string
•
DNS name—ILOXXXXXXXXXXXX, where the Xs represent the serial number of the server
If you enter an incorrect user name and password, or a login attempt fails, iLO imposes a security
delay. For more information about login security, see
“Login security” (page 64) .
IMPORTANT: HP recommends changing the default values after you log in to iLO for the first
time. For instructions, see “Administering users” (page 44) .
Activating iLO licensed features
To activate iLO licensed features, install an HP iLO license. iLO licenses activate functionality such
as graphical Remote Console with multi-user collaboration, video record/playback, and many
32 Setting up iLO