HP Integrated Lights-Out 4 - Manual (Page 162)

◦ LockStep—The system can be configured for LockStep AMP.
◦ None—The system cannot be configured for AMP.
Memory Summary
This section shows a summary of the memory that was installed and operational at POST.
•
Location—The slot or processor on which the memory board, cartridge, or riser is installed.
Possible values follow:
◦ System Board—There is no separate memory board slot. All DIMMs are installed on the
motherboard.
◦ Board Number—There is a memory board slot available. All DIMMs are installed on the
memory board.
◦ Processor Number—The processor on which the memory DIMMs are installed.
◦ Riser Number—The riser on which the memory DIMMs are installed.
•
Number of Sockets—The number of memory module sockets present on the memory board,
cartridge, or riser.
•
Total Memory—The size of the memory for this board, cartridge, or riser, including memory
recognized by the operating system and memory used for spare, mirrored, or XOR
configurations.
•
Operating Frequency—The frequency at which the memory on the memory board, cartridge,
or riser operates.
•
Operating Voltage—The voltage at which the memory on the memory board, cartridge, or
riser operates.
Memory Details
This section shows the memory modules on the host that were installed and operational at POST.
Unpopulated module positions are also listed. Various resilient memory configurations can change
the actual memory inventory from what was sampled at POST. In systems that have a high number
of memory modules, all module positions might not be listed.
By default, empty memory sockets are hidden. To view the empty memory sockets, click show
empty sockets. When empty memory sockets are displayed, click hide empty sockets to hide them.
•
Memory Location—The slot or processor on which the memory module is installed.
•
Socket—The memory module socket number.
•
Status—The memory module status and whether the module is in use.
•
HP SmartMemory—Whether the memory module is HP SmartMemory. Possible values are Yes
and No. If no memory module is installed, the value N/A is displayed.
If the value No is displayed, the listed module is not an HP SmartMemory module. The memory
module will function, but it has no warranty, and it might not perform as well as an HP
SmartMemory module.
For more information about HP SmartMemory, see http://www.hp.com/products/memory .
•
Part Number—The memory module part number.
NOTE: This value is displayed only for HP SmartMemory modules.
162 Using iLO