HP Integrated Lights-Out 4 - Manual (Page 41)

Figure 16 Access Settings – Language page
4. Click Browse (Internet Explorer or Firefox) or Choose File (Chrome) in the Upload Language
Pack section.
5. Select the downloaded language pack, and then click Open.
The following message appears:
Only one language pack is supported at a time. If a language pack
is already installed, it will be replaced with this upload. iLO will
automatically reboot after installing the new language pack. Are
you sure you want to install now?
6. Click OK to continue.
If you have a previously installed language pack, this language pack will replace it.
7. Click Upload.
iLO will automatically reboot after installing a language pack. This will end your browser
connection with iLO.
It might take several minutes before you can re-establish a connection.
Selecting a language pack
After you have installed a language pack, you can select it in the following ways:
•
From the login page, as shown in Figure 17 (page 42) .
Using language packs 41