HP Integrated Lights-Out 4 - Manual (Page 38)

1. Navigate to the technical support page on the HP website: http://www.hp.com/support .
2. Select a country or region and a language.
The HP Support page opens.
3. Click the Drivers & Downloads link.
4. In the search box, enter the server model that you are using (for example, DL360p).
A list of servers is displayed.
5. Click the link for your server.
The HP Support Center page for the server opens.
6. Click the link for your server operating system.
7. Follow the onscreen instructions to download the iLO Online ROM Flash Component file.
8. Double-click the downloaded file, and then click the Extract button.
9. Select a location for the extracted files, and then click OK.
The firmware image is a file similar to ilo4_<yyy>.bin, where <yyy> represents the
firmware version.
Obtaining supported server firmware image files
To obtain the server firmware image files:
1.
Navigate to the technical support page on the HP website: http://www.hp.com/support .
2. Select a country or region.
The HP Support page opens.
3. Click the Drivers & Downloads link.
4. In the search box, enter the server model that you are using (for example, DL360p).
A list of servers is displayed.
5. Click the link for your server.
The HP Support Center page for the server opens.
6. Click the link for the server operating system.
7. Follow the onscreen instructions to download the firmware Online ROM Flash Component
file.
8. Double-click the downloaded file, and then click the Extract button.
9. Select a location for the extracted files, and then click OK.
Updating firmware by using a browser
You can update firmware from any network client by using a supported browser. For a list of
supported browsers, see
“Using the iLO web interface” (page 144) .
To update the server or iLO firmware:
1.
Obtain the firmware image file. For instructions, see “Obtaining the iLO firmware image file”
(page 37) or “Obtaining supported server firmware image files” (page 38) .
2. Navigate to the Administration
→Firmware page.
The Firmware Update page opens, as shown in Figure 15 (page 39) .
38 Configuring iLO