HP Color LaserJet 4730 Multifunction Printer series User Manual
Hp color laserjet 4730mfp
Advertising
Table of contents
Document Outline
- MFP basics
- HP Color LaserJet 4730mfp Series configurations
- Features and benefits of the multifunction peripheral (MFP)
- MFP parts and accessories
- Software
- Software for Macintosh computers
- Printer drivers
- Printer drivers for Macintosh computers
- Install checklist
- Using the control panel
- I/O Configuration
- Printing tasks
- Controlling print jobs
- Selecting print media
- Automatic media type sensing (auto sense mode)
- Configuring input trays
- Configuring trays when the MFP gives a prompt
- To configure a tray when loading paper
- To configure a tray to match print job settings
- Configuring trays using the Paper Handling menu
- Configuring Tray 2, 3, or 4 for a custom paper size
- Printing from Tray 1 (multipurpose tray)
- Printing envelopes from Tray 1
- Printing from Tray 2, 3, or 4
- Loading detectable standard-sized media into Tray 2, 3, or 4
- Loading undetectable standard-sized media into Tray 2, 3, and 4
- Loading custom-sized media into Tray 2
- Printing on special media
- Automatic two-sided (duplex) printing
- Stapling documents
- Special printing situations
- Selecting the output bin
- Job storage features
- Managing memory
- Using features in the printer driver
- Creating and using quick sets
- Creating and using watermarks
- Resizing documents
- Setting a custom paper size from the printer driver
- Using different paper/covers
- Printing a blank first page
- Printing multiple pages on one sheet of paper
- Printing on both sides of the paper
- Setting the stapling options
- Setting the color options
- Using the HP Digital Imaging Options dialog box
- Using the Services tab
- Using features in the Macintosh printer driver
- Copying
- Scanning and sending to e-mail
- Faxing
- Color
- Optional output devices
- Output accessory bridge
- 3-bin mailbox
- Stapler/stacker accessory
- To configure the printer driver to recognize the optional stapler/stacker
- Windows
- Macintosh
- To select the stapler at the control panel for printed jobs
- To select the stapler in the printer driver for printed jobs (Windows)
- To select the stapler in the printer driver for printed jobs (Mac)
- To set the stapler at the control panel for all copy jobs
- To set the stapler at the control panel for a single copy job
- To configure the MFP to stop or continue when the staple cartridge is empty
- Troubleshooting the output accessories
- Security features
- Managing and maintaining the MFP
- Using the embedded Web server
- Using the HP Easy Printer Care Software
- Using HP Web Jetadmin software
- Using the HP Printer Utility for Macintosh
- Opening the HP Printer Utility
- Printing a cleaning page
- Printing a configuration page
- Viewing supplies status
- Ordering supplies online and using other support features
- Uploading a file to the printer
- Uploading fonts to the printer
- Updating the firmware
- Activating the two-sided printing (duplexing) mode
- Activating the Economode printing mode
- Changing the toner density
- Changing the resolution settings
- Locking or unlocking printer storage devices
- Saving or printing stored jobs
- Configuring trays
- Changing network settings
- Opening the embedded Web server
- Setting up e-mail alerts
- Configuring and verifying an IP address
- Setting the real-time clock
- Configuring alerts
- Checking the MFP configuration
- Upgrading the firmware
- Managing print cartridges
- Replacing supplies
- Performing preventive maintenance
- Cleaning the MFP
- Calibrating the scanner
- Solving problems
- Solving general problems
- Determining MFP problems
- Troubleshooting information pages
- Control panel message types
- Control panel messages
- Paper jams
- Clearing jams
- Media-handling problems
- Printer feeds multiple sheets
- Printer feeds incorrect page size
- Printer pulls from incorrect tray
- Media does not feed automatically
- Media does not feed from Tray 2, 3, or 4
- Transparencies or glossy paper will not feed
- Envelopes jam or will not feed in the MFP
- Output is curled or wrinkled
- Printer will not duplex or duplexes incorrectly
- Understanding MFP messages
- Understanding accessory lights for the 3-bin mailbox and stapler/stacker
- Understanding lights on the formatter
- Color printing problems
- Correcting print quality and copy quality problems
- Print quality problems associated with media
- Overhead transparency defects
- Print quality problems associated with the environment
- Print quality problems associated with jams
- Print quality troubleshooting pages
- Print quality troubleshooting tool
- Image defect examples
- Cleaning the scanner glass
- Calibrating the MFP
- Repetitive defect ruler
- Solving e-mail problems
- Solving network connectivity problems
- Troubleshooting common Macintosh problems
- Working with memory and print server cards
- Supplies and accessories
- Service and support
- MFP specifications
- Media specifications
- Regulatory information
- Index