HP Color LaserJet 4730 Multifunction Printer series User Manual

Page 284

Advertising
background image

Control panel message

Description

Recommended action

MANUALLY FEED

[TYPE] [SIZE]

To use another

tray touch OK

alternates with

MANUALLY FEED

[TYPE] [SIZE]

For help press

A job was sent that specified MANUAL
FEED
and Tray 1 is empty. Another tray is
available.

1.

Load Tray 1 with the specified paper.

2.

If prompted, confirm size and type of
paper loaded.

3.

Otherwise, touch

OK

to select another

tray.

MANUALLY FEED

OUTPUT STACK

alternates with

Then touch OK to

print second sides

The even-numbered pages of a manual two-
sided document have been printed and the
MFP is waiting for the output stack to be
inserted for the odd-numbered pages to be
printed.

Follow the instructions on the Print on Both
Sides
instruction dialog box at the computer.

OR

Press for help at the MFP.

Mechanical Error

The ADF has experienced a mechanical
error.

Turn the MFP off then on. To temporarily
clear this message, touch

IGNORE

. If the

message persists, contact an HP-authorized
service or support provider. See the HP
support flyer, or go to

http://www.hp.com/

suppport/clj4730mfp

.

MIXED PAPER SIZES IN

JOB TO STAPLE

The job contains different paper sizes and
cannot be stapled. The status light is solid
green.

Use a uniform paper size when sending jobs
to the stapler.

Moving solenoid

To exit press

Stop

The MFP is executing a component test and
the component selected is a solenoid.

No action necessary.

Moving solenoid and motor

To exit press

Stop

The MFP is executing a component test and
the components selected are the solenoid
and the motor.

No action necessary.

No job to cancel

There are no stored jobs that can be
cancelled.

No action necessary.

NO STORED JOBS

No jobs stored on the EIO disk. This message
is displayed when the user enters the
RETRIEVE JOB menu and there are no jobs
to retrieve.

No action necessary.

NON HP SUPPLY

IN USE

alternates with

Ready

The supplies gauge will display the
consumption levels of print cartridges, but the
level of any refilled cartridge will not be
shown.

The MFP has detected that a non-HP print
cartridge is currently installed.

If you believe you purchased an HP cartridge,
please call the HP fraud hotline
(1-877-219-3183, toll-free in North America) .

CAUTION

Any MFP repair

required as a result of using non-HP
cartridges is not covered under HP
warranty.

264

Chapter 12 Solving problems

ENWW

Advertising