HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 226)

3. Click the column header of your choice (such as IP Address or Device Model) to arrange the list
of available devices in ascending or descending order.
4. Highlight the product to configure, and click Open Device.
5. From the sub-menu at the top of the HP Web Jetadmin screen, click Configuration.
6. Click the network link located on the left side of the configuration screen.
7. Type the new IP information. You might need to scroll down for more options.
8. Click Apply to save the settings.
9. Click the Refresh button located next to the question mark on the right side of the screen.
10. Verify the IP information by clicking Status Diagnostics or by printing a configuration page.
To change an IP address by using the embedded Web server
The MFP has an embedded Web server that can be used to modify the TCP/IP parameters. To use the
embedded Web server, the HP Jetdirect print server must have an IP address already configured. On
a network, this is done automatically during initial product installation.
1. In a supported Web browser, type the current IP address of the HP Jetdirect print server as the
URL. The Device Status page of the embedded Web server appears.
2. Click Networking. From this page, you can modify the MFP network configuration.
To change an IP address using the control panel
For more information about using the control panel to change an IP address, see Configuring the printer
driver to recognize the 3-bin mailbox/stapler/stacker .
1. Press Menu .
2. Scroll to and touch CONFIGURE DEVICE .
3. Scroll to and touch I/O .
4. Scroll to and touch EMBEDDED JETDIRECT MENU .
5. Scroll to and touch TCP/IP .
6. Scroll to and touch CONFIG METHOD .
7. Scroll to and touch MANUAL .
8. Scroll to and touch MANUAL SETTINGS .
9. Scroll to and touch IP ADDRESS .
10. Touch the left and right arrows to select each byte of the IP address.
11. Use the numeric keypad to enter the value of each byte.
12. Touch OK to save the IP address.
13. Scroll to and touch SUBNET MASK .
14. Touch the left and right arrows to select each byte of the subnet mask.
206 Chapter 11 Managing and maintaining the MFP ENWW