HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 116)

4. Load media into the tray face up.
NOTE For best performance, load the tray completely full without splitting the ream of
paper. Splitting the ream might cause a multi-feed problem, which could result in a paper
jam. The capacity of the paper tray can vary. For example, if you are using 75 g/m
2 (20 lb)
paper, the tray holds a full ream of 500 sheets. If the media is heavier than 75 g/m 2 (20 lb),
the tray will not hold a full ream, and you must reduce the number of sheets accordingly. Do
not overfill the tray because the MFP might not pick up the paper.
NOTE If the tray is not properly adjusted, the MFP might display an error message or the
media might jam.
NOTE If you are duplex printing, see Automatic two-sided (duplex) printing for loading
instructions.
5. Slide the tray into the MFP. The MFP will display the tray’s media type and size. If the configuration
is not correct, touch
OK on the control panel.
6. If the configuration is correct, touch EXIT .
96 Chapter 4 Printing tasks ENWW