HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 197)

Macintosh
1. Open the Printer Center utility.
2. Select HP Color LaserJet 4730.
3. On the File menu, click Show Info (command, i).
4. Select the Installable Options tab.
5. Scroll to Accessory Output Bins and select HP 500 sheet stapler/stacker or HP 700 sheet 3-
bin Mailbox.
6. Click Apply Changes.
To select the stapler at the control panel for printed jobs
1. Press Menu .
2. Scroll to and touch CONFIGURE DEVICE .
3. Touch STAPLER/STACKER .
4. Touch STAPLE .
5. Touch the option that you want to use, either NONE or ONE .
NOTE Selecting the stapler at the MFP control panel changes the default setting to STAPLE.
It is possible that all print jobs will be stapled. However, settings that are changed in the printer
driver override settings that are changed at the control panel.
To select the stapler in the printer driver for printed jobs (Windows)
1. Click Start, point to Settings, and then click Printers (for Windows 2000) or Printers and
Faxes (for Windows XP).
2. Right-click the HP product icon, and then click Properties or Printer Preferences.
3. Click the Device Settings tab.
4. On the Output tab, click the drop-down list under Staple, and click One-edge.
To select the stapler in the printer driver for printed jobs (Mac)
Select the stapler by creating a new preset in the printer driver.
1. Open a document and then click Print on the File menu.
2. Select the appropriate stapling option.
3. In the Presets pop-up menu, click Save As, and then type a name for the preset.
ENWW Stapler/stacker accessory 177