HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 81)

Item Options Values Explanation
RESET SECURITY YES
NO*
RESET SECURITY: Specifies
whether the current security settings
on the print server are saved or reset
to factory defaults.
LINK SPEED AUTO
10T HALF
10T FULL
100TX HALF
100TX FULL
The print server will automatically
configure itself to match the network
link speed and communication mode.
If this process fails, either 100TX
HALF or 10T HALF is set.
10T HALF: 10 Mbps, half-duplex
operation.
10T FULL: 10 Mbps, full-duplex
operation.
100TX HALF: 100 Mbps, half-duplex
operation.
100TX FULL: 100 Mbps, full-duplex
operation.
Resets submenu
To gain access to this menu, touch CONFIGURE DEVICE , and then touch RESETS .
NOTE Use this menu with caution. You can lose buffered page data or MFP configuration
settings when you select these items. Reset the MFP only under the following circumstances:
● You want to restore the MFP default settings.
● Communication between the MFP and computer has been interrupted, and you are not able to
resolve the problem by any other method. See
Solving network connectivity problems .
● You are having problems with a port.
The items in the Resets submenu will clear all memory in the MFP, while pressing the Reset button
clears only the current job.
Item Values Explanation
RESTORE FACTORY SETTINGS No value to select This item restores all control-panel settings
to the original factory settings.
SLEEP MODE OFF
ON*
Turns sleep mode on or off. Using sleep
mode offers the following advantages:
● Minimizes the amount of power that
the MFP consumes when it is idle
● Reduces wear on electronic
components in the MFP
The MFP automatically exits sleep mode
when you send a print job, receive a fax,
touch any button on the control panel, touch
ENWW Configure device menu 61