Preprinted forms and letterhead, Recycled paper, Preprinted forms and letterhead recycled paper – HP Color LaserJet 4730 Multifunction Printer series User Manual
Page 123
Preprinted forms and letterhead
Observe the following guidelines for best results with preprinted forms and letterhead:
●
Forms and letterhead must be printed with heat-resistant inks that will not melt, vaporize, or release
hazardous emissions when subjected to the MFP’s fusing temperature of approximately 190°C
(374°F) for 0.1 second.
●
Inks must be non-flammable and should not adversely affect any MFP rollers.
●
Forms and letterhead should be sealed in a moisture-proof wrapping to prevent changes during
storage.
●
Before loading preprinted paper such as forms and letterhead, verify that the ink on the paper is
dry. During the fusing process, wet ink can come off of preprinted paper.
●
When duplex printing, preprinted forms and letterhead must be oriented correctly. For more
information, see
Automatic two-sided (duplex) printing
.
Recycled paper
This MFP supports the use of recycled paper. Recycled paper must meet the same specifications as
standard paper. See the HP LaserJet Printer Family Print Media Guide. Hewlett-Packard recommends
that recycled paper contain no more than 5% ground wood.
ENWW
Printing on special media
103