HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 177)

Follow these instructions to connect the fax accessory to a phone jack.
1. Locate the phone cord that is included with the fax accessory kit. Connect one end of the phone
cord into the fax accessory phone jack that is on the formatter. Push the connector until it clicks.
CAUTION Be sure to connect the phone line to the fax accessory port, which is located in
the center of the formatter. Do not connect the phone line to the HP Jetdirect port, which is
nearer the bottom of the formatter.
2. Connect the other end of the phone cord into the phone jack on the wall. Push the connector until
it clicks.
Configuring and using the fax features
Before you can use the fax features, you must configure them in the control-panel menus. For complete
information about configuring and using the fax accessory and for information about troubleshooting
problems with the fax accessory, see theHP LaserJet Analog Fax Accessory 300 User Guide provided
with the fax accessory.
ENWW Analog faxing 157