HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 93)

Parallel configuration
The HP Color LaserJet 4730mfp series supports network and parallel connections at the same time. A
parallel connection is made by connecting the MFP to the computer using a bidirectional parallel cable
(IEEE-1284-C compliant) with a c-connector plugged into the MFP’s parallel port. The cable can be a
maximum of 10 meters (30 feet) long.
When used to describe a parallel interface, the term bidirectional indicates that the MFP is able to both
receive data from the computer and send data to the computer through the parallel port.
Figure 3-1 Parallel port connection
1 C-connector
2 Parallel port
NOTE To use the enhanced capabilities of the bidirectional parallel interface such as
bidirectional communication between the computer and MFP, faster transfer of data, and
automatic configuration of printer drivers, ensure that the most recent printer driver is installed.
NOTE Factory settings support automatic switching between the parallel port and one or more
network connections on the MFP. If you are experiencing problems, see Network configuration .
ENWW Parallel configuration 73