HP Color LaserJet 4730 Multifunction Printer series User Manual
Page 286
Control panel message
Description
Recommended action
Output Bin X Full
The specified output bin is full and printing
cannot continue.
Empty the bin to continue printing.
OUTPUT PAPER PATH OPEN
The path between the MFP and the output
device is open and must be closed before
printing can continue.
1.
If you have a 3–bin mailbox installed,
make sure the jam-access door is
closed.
2.
If you have a stapler/stacker installed,
make sure the staple cartridge is
snapped into position and that the
staple-cartridge door is closed.
.
Paused
To return to Ready
press RESUME key
The MFP is paused, and there are no error
messages pending at the display. The I/O
continues receiving data until memory is full.
Press the
Stop
key.
Performing
PRINT/STOP TEST
The MFP is performing a print/stop test.
No action necessary.
Performing
upgrade
A firmware upgrade is in process.
Do not turn the MFP off until the MFP returns
to Ready.
Performing...
PAPER PATH TEST
The MFP is performing a paper path test.
No action necessary.
Please wait
The MFP is in the process of clearing data.
No action necessary.
PRINTING STOPPED
To continue touch "OK".
This message is displayed when a Print/Stop
Test is run and time expires.
Touch
OK
to continue printing.
Printing...
CMYK SAMPLES
This message displays while the MFP CMYK
samples page is being generated.
No action necessary.
Printing...
CONFIGURATION
The MFP is generating the configuration
page. The MFP will return to the online
Ready state when the page is completed.
No action necessary.
Printing...
DEMO PAGE
The MFP is generating the demo page. The
MFP will return to the online Ready state
when the page is completed.
No action necessary.
Printing...
DIAGNOSTICS PAGE
The MFP is generating the diagnostics page.
The MFP will return to the online Ready state
when the page is completed.
No action necessary.
Printing...
ENGINE TEST
The MFP is generating the engine test page.
The MFP will return to the online Ready state
when the page is completed.
No action necessary.
Printing...
Event Log
The MFP is generating the event log page.
The MFP will return to the online Ready state
when the page is completed.
No action necessary.
Printing...
FILE DIRECTORY
The MFP is generating the mass storage
directory page. The MFP will return to the
Ready state when the page is completed.
No action necessary.
266
Chapter 12 Solving problems
ENWW