HP Color LaserJet 4730 Multifunction Printer series User Manual

Page 276

Advertising
background image

Control panel message

Description

Recommended action

turn off then on

8X.YYYY

EIO X ERROR

The I/O accessory card in slot X has
encountered a critical error.

X Description

1: error in slot 1

2: error in slot 2

1.

Turn the MFP off then on.

2.

If the problem persists, contact
HP Support at

http://www.hp.com/

support/clj4730mfp

.

8X.YYYY EMBEDDED

JETDIRECT ERROR

This message is generated by a failure of the
embedded JetDirect print server.

Turn the MFP off then on. Press for more
information.

If the message persists, contact HP Support
at

http://www.hp.com/support/clj4730mfp

.

[FS] FILE

OPERATION FAILED

To clear touch "OK".

alternates with

Ready

The MFP received a PJL file system
command that attempted to perform an
illogical operation (for example, to download
a file to a non-existent directory).

1.

To clear the message, touch

OK

.

2.

If the message persists, turn the MFP off
then on.

3.

If the message reappears, there may be
a problem with the software application.

[FS] NOT

INITIALIZED

The device has not been initialized.

You can use Web JetAdmin to initialize the
device.

[FS] NOT

INITIALIZED

To clear touch "OK".

alternates with

<Current status message>

The Flash file system has not been initialized.
It must be initialized before it can be used.

Touch

OK

to continue.

ABCDEFGHIJYW

011000000000

alternates with

To exit press

Stop

This message is displayed when a paper path
sensor test or a paper path test is run. The
alphabetical value indicates which sensor is
being checked.

No action necessary.

Access Denied

MENUS LOCKED

An attempt has been made to modify a menu
item while the control panel security
mechanism is enabled by the MFP
administrator. The message will disappear
shortly, and the MFP will return to Ready
state.

Contact the MFP administrator to change
settings.

ADF Cover Open

The ADF cover is open.

Close the ADF cover. Follow the instructions
in the onscreen dialog box.

ADF Output Bin Full

The ADF output bin holds 50 sheets of paper.
The MFP stops when the bin is full.

Remove the paper from the ADF output bin.

ADF Paper Jam

Paper is jammed in the ADF.

Follow the instructions in the onscreen dialog
box. For more information, see

Clearing

jams

.

256

Chapter 12 Solving problems

ENWW

Advertising