HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 198)

To set the stapler at the control panel for all copy jobs
NOTE The following procedure changes the default setting for all copy jobs.
1. Touch Menu .
2. Scroll to and touch CONFIGURE DEVICE .
3. Touch COPYING .
4. Touch STAPLE .
5. Touch the option that you want to use, either NONE or CORNER .
To set the stapler at the control panel for a single copy job
NOTE The following procedure sets the stapling option for only the current copy job.
1. Touch COPY .
2. Touch COPY SETTINGS .
3. Touch the STAPLE tab.
4. Touch the option that you want to use, either NONE or ONE .
To configure the MFP to stop or continue when the staple cartridge
is empty
You can specify whether the MFP stops printing when the staple cartridge is empty or if it continues
printing but does not staple the jobs.
1. Touch Menu .
2. Scroll to and touch CONFIGURE DEVICE .
3. Touch STAPLER/STACKER .
4. Touch STAPLES OUT .
5. Touch the option that you want to use:
● Select Stop to stop all printing until the staple cartridge is replaced.
● Select CONTINUE to continue printing jobs without stapling them.
178 Chapter 9 Optional output devices ENWW