HP Color LaserJet 4730 Multifunction Printer series User Manual
Page 119
3.
Load media into the tray face up.
NOTE
For best performance, load the tray completely full without splitting the ream of
paper. Splitting the ream might cause a multi-feed problem, which could result in a paper
jam. The capacity of the paper tray can vary. For example, if you are using 75 g/m
2
(20 lb)
paper, the tray holds a full ream of 500 sheets. If the media is heavier than 75 g/m
2
(20 lb),
the tray will not hold a full ream, and you must reduce the number of sheets accordingly. Do
not overfill the tray because the MFP might not pick up the paper.
NOTE
If you are duplex printing, see
Automatic two-sided (duplex) printing
for loading
instructions.
4.
Slide the media width guides in making sure that they gently touch the paper. Insert the tray into
the MFP.
5.
Slide the tray into the MFP. The MFP will display the tray type and size configuration. To specify
specific custom dimensions, or if the type is not correct, touch
OK
when the MFP prompts To
change size or type.
6.
If the configuration is correct, touch
EXIT
.
ENWW
Configuring input trays
99