HP Color LaserJet 4730 Multifunction Printer series User Manual
Page 294
Control panel message
Description
Recommended action
[TYPE] [SIZE]
alternates with
Ready
TRAY X OPEN
For help press
alternates with
Ready
The specified tray is open or not closed
completely.
Close the tray.
TRAY XX SIZE= <SIZE>
Setting saved
The size selected from the menu has been
saved.
No action is necessary.
TYPE MISMATCH
TRAY X=[TYPE]
For help press
alternates with
Ready
The paper type loaded in the tray does not
match the paper type configured for the tray.
1.
Adjust the side and rear guides against
the paper.
2.
If necessary, touch
OK
after the tray is
closed to change the paper size or type
configuration to match the paper loaded
in the tray.
Unable to mopy job
alternates with
Processing...
The print job cannot be mopied because of a
memory, disk, or configuration problem. Only
one copy will be produced.
Install additional memory in the MFP or install
a disk drive in the MFP.
UNABLE TO SEND
To temporarily hide this message in order to
fax or send to e-mail, touch
IGNORE
. If the
message persists, contact an HP-authorized
service or support provider. See the HP
support flyer, or go to
Unable to send Fax. Please check fax
configuration.
The MFP was unable to send the fax.
Contact the network administrator.
UNABLE TO SEND JOB
To temporarily hide this message in order to
fax or send to e-mail, touch
IGNORE
. If the
message persists, contact an HP-authorized
service or support provider. See the HP
support flyer, or go to
Unable to Store Job
JOB NAME
alternates with
Processing...
A job cannot be stored because of a memory,
disk, or configuration problem.
Install additional memory in the MFP, or
install a disk drive into the MFP. If a disk drive
is installed, delete previously stored print
jobs.
USE TRAY X
[TYPE] [SIZE]
To change touch or
To use touch OK
The MFP is offering a selection of alternate
paper to use for the print job.
1.
View tray configurations (type and size)
using the scroll bar.
2.
Touch
OK
to select a tray.
3.
To return to the previous message,
touch
Back
.
274
Chapter 12 Solving problems
ENWW