HP Color LaserJet 4730 Multifunction Printer series - Manual (Page 50)

Item Details
● If the fax accessory is installed, the modem
status reads Operational/Enabled.
● On the Embedded JetDirect Page, verify
that the status reads I/O Card Ready and
that you have a valid IP address.
Verify you can copy from the copier glass of the
MFP. Place configuration page face down on copier
glass and press
Start .
Verify you can copy from the Automatic
Document Feeder (ADF). Place configuration page face up in ADF and
press
Start .
Verify you can send a fax from the MFP. Place document face up in the ADF and use the
key pad to send to a known functioning fax
number.
Verify you can send an e-mail. Place document face up in the ADF, use keypad
to enter e-mail address (LDAP must be
configured for this to function).
Verify you can print to the MFP. After loading the printing system software on a
networked computer, print a test page from the
driver.
Verify the date and time are set. The MFP will not print until the date and time have
been set. See
Setting the real-time clock for more
information.
Verify that all users have access to the User
Training. http://www.hp.com/go/usemymfp
Table 1-1 HP Color LaserJet 4730mfp (continued)
30 Chapter 1 MFP basics ENWW