Setting the subnet mask, Setting the default gateway – HP Color LaserJet 4730 Multifunction Printer series User Manual
Page 91
Setting the subnet mask
1.
Press
Menu
to enter the MENUS.
2.
Touch
CONFIGURE DEVICE
.
3.
Touch
I/O
.
4.
Touch
JETDIRECT MENU
.
5.
Touch
TCP/IP
.
6.
Touch
CONFIG METHOD
.
7.
Touch
MANUAL
.
▲
Touch
MANUAL SETTINGS
.
8.
Touch
SUBNET MASK
NOTE
The first three sets of numbers are highlighted.
9.
Use the right and left arrows to select each byte of the subnet mask, and then use the numeric
keypad to enter the value of each byte.
10.
Touch
OK
.
Setting the default gateway
1.
Press
Menu
to enter the MENUS.
2.
Touch
CONFIGURE DEVICE
.
3.
Touch
I/O
.
4.
Touch
JETDIRECT MENU
.
5.
Touch
TCP/IP
.
6.
Touch
CONFIG METHOD
.
7.
Touch
MANUAL
or
MANUAL SETTINGS
.
8.
Touch
DEFAULT GATEWAY
.
NOTE
The first set of 3 numbers shows the default settings. If there is not a number
highlighted, a highlighted empty underscore appears.
9.
Use the right and left arrows to select each byte of the default gateway, and then use the numeric
keypad to enter the value of each byte.
10.
Touch
OK
.
ENWW
Network configuration
71