Event log – HP Color LaserJet 4730 Multifunction Printer series User Manual
Page 264
back and front of a page is centered. Image placement varies slightly for each tray. Perform the
registration procedure for each tray.
1.
Press
Menu
to enter the MENUS.
2.
Touch
CONFIGURE DEVICE
.
3.
Touch
PRINT QUALITY
.
4.
Touch
SET REGISTRATION
.
NOTE
You can select a tray by specifying a SOURCE. The default SOURCE is Tray 2.
To keep the registration for Tray 2, go to step 7. Otherwise, proceed to the next step.
5.
Touch SOURCE.
6.
Select a tray.
After selecting the tray, the MFP control panel returns to the SET REGISTRATION menu.
7.
Touch
PRINT TEST PAGE
.
8.
Follow the instructions on the printed page.
Event log
The event log lists the MFP events, including MFP jams, service errors, and other MFP conditions.
1.
Press
Menu
to enter the MENUS.
2.
Touch
DIAGNOSTICS
.
3.
Touch
PRINT EVENT LOG
.
The message Printing... EVENT LOG appears on the display until the MFP finishes printing the event
log. The MFP returns to the Ready state after printing the event log.
244
Chapter 12 Solving problems
ENWW